...

PVC Wall Panels- Cost-Effective Alternative To Tiles

If you want a versatile and cost-effective solution for various interior design and architectural projects, then consider modern PVC wall panels. It has become much more well-known in recent years. These wall panels offer an array of benefits, such as affordability, durability and ease of installation.

In this article, we will discuss the key aspects of these panels, including their advantages and disadvantages and the installation process. Also, know why you may want to consider opting for PVC panels in Kuwait for your next project. So why wait?

The range of possibilities available for home improvement has increased in the modern world where innovation has reached its pinnacle. One such innovative solution is the use of PVC walls for panels.

Understanding the PVC Wall Panels?

Polyvinyl chloride wall panels are made from a combination of plastic and vinyl materials. Typically, these panels are well known for their lightweight nature, making them easy to install and handle. The most popular PVC wall panels Kuwait come in various designs and textures, which can allow for a wide range of aesthetic possibilities. 

It is not only a strong but also lightweight material that is suitable to cover walls, ceilings and floors. In addition, the modern advance in the production technique for these panels means they have become more high quality and aspirational for the bathroom zone.

Types of PVC Wall Panels for Interiors

pvc wall panel
  • PVC Foam Board

Usually, PVC foam board is prepared by pressing with additives and PVC foaming. Typically, their ranges are available from 1mm to 20mm. But generally, the size is 4mm or more thick for panelling a wall. In addition, they are available in many colours, such as white, black, yellow, red, green and blue.

  • PVC Sheets

Another type of PVC wall panel for the bedroom is PVC sheets. These sheets are sandwiched between the longitudinal grid of pvc within them. Also provides the sheet strength and makes them lightweight. So that they are also known as lightweight panels.

  • 3D PVC Wall Panels

These 3D PVC panels have an embarrassing effect on PVC. The 3D PVC wall panels give a 3D effect by creating light depth in the wall. Besides, it allows a modern and contemporary look in any space.

Things That Make PVC Wall Panels the Most Popular

There are many advantages to PVC wall panelling; a few of them can be shared in this section:

  • Easy to Install

PVC panels for walls can be installed effortlessly compared to tiles requiring skilled labour. Thanks to their user-friendly interlocking systems, they can make it lightweight and natural.

  • Low Resistance

Polyvinyl chloride panels have a clean and sleek look that is very simple to clean and maintain. Just a simple wipe-down will keep such panels looking fresh.

  • Budget Friendly

PVC panels Kuwait usually tend to be an economical option and provide a much broader design range, including their installation and maintenance costs.

  • Moisture Resistant

Another popular feature of budget-friendly PVC wall panels in Kuwait is their waterproofing. These features make them perfect for any room prone to dampness, like bathrooms and kitchen rooms.

  • Hygienic

Without leaving a stain, any spills can be easily wiped and it can make it easier to keep everything from bacteria to viruses from making their home in the room.

  • Durable

PVC is strong and durable, which means it lasts longer without the burden of pesky maintenance. Therefore, it is particularly welcome news for anyone who wonders what exactly is building up in the grout of their tiles.

  • Customizable

As well, PVC panels are versatile, so you will be able to see many different designs, themes and colours. So that it can match your various architectural styles.

Disadvantages of PVC Wall Panels

Though PVC wall panelling has so many benefits, it has a few cons. So before buying PVC wall panels, you need to know these cons to maintain a long lifespan, such as:

  • Not fire resistant

Commercial PVC wall panel designs are only suitable for indoor use and cannot be used outdoors. They are not fire resistant because they are not highly resistant to high temperatures that can cause PVC panels for walls to twist, wrap and crack in extreme heat.

  • It looks like plastic

They look like cheap plastic. So when you decide to use the latest PVC wall panels, you need to ensure they look less shiny. 

  • Fragile structure

Compared to other materials, including steel and wood, wall panels PVC are structurally more fragile and do not have a good load-bearing capability. Therefore, it is very important to avoid heavy objects during use.

How To Choose The Best PVC Wall Panels

It is time to freshen up the kitchen, bathroom or any other space, but you do not know where to start. We have covered it. There are so many colours and styles of wall panels. So it is a little bit difficult to choose cheap PVC wall panels. 

Therefore, we have developed this stage guide to narrow down your choices. This can help you visualise your perfect new room.

  • Colour

Are you looking for a pattern or a flat colour? When designing your room, you will have a colour theme in mind. One colour for the whole room; contrasting colours on a feature wall or opposing walls.

  • Finish

Are you seeking a high gloss, gloss or matte finish for your panels? This may often overlooked but can change the look of your room significantly concerning reflective surfaces and light.

  • Style of Panel

Consider hollow-core or solid core? Decorative wall panels come in two types. One is the hollow core, which is the strength that comes from the internal ribs. Another type is a solid core, which can look like a hollow core but has a greater weight and density.

pvc wall panel
  • Size of Panel

There are a bunch of sizes available, such as 250mm, 400mm and 1000mm. Each of the sizes offers individual benefits. So choose one size that matches your preference.

  • Panel Profile

Whether you are looking for a flat panel, a flush finish or the centre of the panel,? A flat PVC panel will give you a solid, smooth effect. While a V groove will create a repeat pattern.

How Do You Install PVC Wall Panels?

To ensure the plastic wall panel looks as good as it possibly can, it is very important to install PVC panels on walls correctly. So read through our quick step-by-step guide to discover how to do it. Don’t worry; the installation process is very simple. So let’s get started to explore:

Essential Tools You May Need

  • Tape measure
  • Spirit level
  • Utility knife
  • Silicone sealant
  • Fine tooth saw
  • Set square
  • Panel adhesive
  • Non-corrosive screws
  • Staple gun
  • Hammer
  • Screwdriver
  • Mitre block

PVC Wall Panels Installation Process

pvc wall panel kuwait
  • Product Checks

Before installing PVC flat wall panels, it is important to check over all your panel products, such as matching all batch numbers on your packages. Check for any defects or colour differences. Also, the tongue and groove edges have been checked for damage or dirt.

  • Prepare The Area

If you want to get a professional finish to your installation, you must prepare the whole installation area before the process. Things included in the preparation process the room has a temperature between 18C/62F and 27C/80F. Because the panels are at room temperature. The old wall surface was made as smooth as possible and removed obvious lumps. Besides, it removes any dust and debris from the wall.

  • Measure and Fix Starter trims

Start by measuring the base trim that will hold the base of the PVC panelling for the wall. You can use a mitre block for a near-edge cut. Then apply adhesive to the trim and the surface that will take the trim. Also, fix the place.

  • Joins The Seal

Ensure that any joints are thoroughly sealed to prevent leaks.

  • Install Edge Trim or Corner

Then apply adhesive to the wall and trim for the vertical edge. If you are installing along a corner, you can start with the corner piece. However, if you are installing along just one wall, begin with an edge trim.

  • Measure and Cut The Panels

Prepare the panels for fixing by measuring each panel. Then cut them to the required height.

  • Fit First Panel

Apply the panel adhesive to the rear of the wall panel. Beside the grove of the corner. Slot the edge of the wall panel into the grove and push the panel firmly into place.

pvc wall panel for home

What is the PVC wall panel cost of installation?

The PVC panel installation cost depends on three things. If you know these three things, then you can better understand the PVC wall panels price.

  • The area of wall panels

The first factor that influences the cost of wall panels in Kuwait is the area of the wall panel. This can work in such a way that the larger the area of the wall panel, the higher the cost of installation.

  • Who installs the panels?

Another important factor is the vendor who installs the panels. It comes into play when you look at the expense. Whether there are different vendors with different rates.

  • Location

The last factor is your location this is somewhat interconnected with the second factor. Typically, your location affects the pricing of PVC wall panel installation. Because the overall labour cost, transportation cost and material cost are different.

Therefore, to get a better idea of the overall price, look at these three factors that are related to the PVC panel installation cost range. I hope that now it is clear and you find your answer.

How do I cut PVC wall panels?

Cutting the plastic wall panels is very easy, if you know how. So knowing the cutting process is very essential. Here I am providing the process you need to know:

Tools for cutting a PVC wall panel

  • Pencil
  • Tape measure
  • Ruler
  • Your chosen cutting tool

Options For Cutting Tools

pvc wall panel cutting

Usually, there are four available options for cutting wall panels, such as:

  • Hand or Tenon Saw

You can use these hand-saw cutting methods, but ensure the saw has a fine tooth pattern for a clean cut.

  • Jigsaw

Another great way is with a jigsaw for cutting curves or patterns. But we suggest a fine tooth blade.

  • Stanley Knife

A sharp Stanley knife will give a perfectly clean cut. But ensure you are using a stable, flat surface when cutting.

  • Chop Saw or Circular Saw

Typically, both options can be used but the blade can often give a coarse cut so please test first.

PVC Panel Cutting Process

Step 1: Take your panel and stabilise it on a flat in preparation for cutting.

Step 2: Flip the panel over so that the face of the wall panel is facing downward.

Step 3: Take your pencil and tape measure.

Step 4: Mark out your required measurements on the back side of the panel.

Step 4: Take your ruler and make a clear straight line mark with the ruler for cutting the panel.

Step 5: Take your saw and cut an incision at one end of the panel.

Step 6: Slowly start to cut the panel in a straight line directly through the panel.

Step 7: Once your panel is cut down this way, it is ready to be installed.

How do I clean PVC wall panels?

PVC 3D wall panels are an easy-to-clean and installation solution for any space. Because they are very easy to clean and have no build-up of mould. But if you want to keep them clean and maintain a new look, follow these tips:

  • Spray the surface to be cleaned with PVC panel cleaner from about 15-20 cm away from the panel.
  • Leave the solution for 30 seconds for stubborn marks.
  • Rinse out your sponge and wipe off the cleaning solution.
  • Then wipe over with a dry cloth.
PVC Wall Panels Near Me - Get in touch today!

At Home Decoration KW, we offer the best PVC wall panel service in Kuwait. With our high-quality panel solutions, we make sure to cover all your specific panelling preferences and needs. With years of industry experience at homedecorationkw.com, PVC panels for walls in Kuwait are engineered to meet rigorous standards of safety, durability and aesthetics.

We offer various designs, style options and colours for PVC cladding panels to fit your unique interior decor. Even our commitment to customer satisfaction continues beyond the product. Therefore, we have an expert team that can help guide you.

Contact us today for a free consultation and get the perfect panels for your home and commercial or residential space.

pvc wall panel

Superior Note

Within 10 km from the store location of Hawally Block 8, State 279, Tunis State, Al Refai Complex, Kuwait, free home delivery is offered for any order. We appreciate you selecting Home Decoration KW!

Frequently
Asked Questions

Yes, PVC panels are a great way to waterproof an area without wasting time. These panels can help reduce the chance of mould.

Yes, PVC panels can go over tiles and the solid design on the back of the PVC wall panelling. Even with intricate tiles underneath, they can provide a flat finish.

Usually, the lifespan of PVC panels can vary depending on a few factors, such as environmental conditions, installation quality, and maintenance quality. However, quality PVC wall panels can last anywhere from 20 to 30 years.

Yes, they are well suited for cladding the ceilings and walls of moisture-laden areas.

No, PVC wall panels are affordable, particularly when compared to traditional building materials.

Scroll to Top
Open chat
Hello
Welcome to Home_decoration_kw
Seraphinite AcceleratorOptimized by Seraphinite Accelerator
Turns on site high speed to be attractive for people and search engines.